Golf Driving Tips: Ways To Improve Your Game
21. May 2009 by Tee It Up Pro Shop.
No golfer in their right mind is going to turn down the chance to learn some golf driving tips that are going to help improve their game. From golf tips for driving straight to golf driving tips for driving around a bend, all golfers have room for improvement and so you are going to want to learn about as many of these tips as you can.
If you want to learn some golf driving tips, there are a few in particular that are going to be helpful to you and make sure that you are the best golfer you can be.
Golf Driving Tips: Driving for Success
So you know that you want to learn some golf driving tips, but which are going to be the most useful for you to know? One of the best tips for driving the golf ball that you can learn involves getting the proper setup. You want to set up the swing properly, otherwise your whole shot is going to be off.
You should understand the sequence of motion, or else you may be just lost and be unable to achieve success in the game of golf. You want to learn about the sequence of setting up, swinging and driving with the correct weight transfer, because this is actually one of the most major factors to your golf game in general.
Another of the most helpful golf driving tips is to let the power build and then release at impact. One of the biggest mistakes that players make when they drive the ball is that they release at the wrong time, and as a result their swing is not half as powerful as it could be. Make sure that you pay close attention to when the power is at its peak and then release right at this point.
These are just a few among many different tips that you can go through in order to learn how to drive the ball. Remember, golf is a sport where players can constantly be improving and so you never want to act as though you know it all, and act like you are ever the best player that you can be. You can always learn new things and put a new spin on your game. Even the best golf players in the world, players like Tiger Woods even, are constantly striving to improve if you can believe that at all.
Making Your Own Golf Clubs
21. May 2009 by Tee It Up Pro Shop.
For the amateur golfer, making your own set of golf clubs or just that one special club can be a lot of fun, and it could help your game.
You may ask why you would ever think of building your own golf clubs. Well, a big reason is that when you buy clubs off the shelf you are stuck with the sizes and fits that are in stock.There may be one size for men, another for the women and another for the children who need junior golf clubs. For someone with a 6′ 2″ height, buying off the rack can cause one’s golf game to suffer and cause annoying back aches because the clubs that was picked were too short. By learning to make your own golf club, you can help your body from back pains and same money at the same time.
There really isn’t much needed to make one’s own golf clubs. You just need a head, shaft, grip and some materials to hold it all together.Browsing through the net will give you many great options to buying your components and make clubs that match your game.
Club heads — iron and wood heads are available anywhere. One can buy club heads that resemble popular brands or designs unique to the manufacturer you buy them from. Different vendor offers their own line of clubs.
Shafts - you can buy the same shafts that most of these branded golf club companies use.
Grips - there are a variety of sizes and types of grips.You can find them in different prices and even get the same ones the pros use..
Ferules — That’s the little plastic piece that goes on the end of the shaft above the club head you’ll find on some clubs. These are purely decorative except on graphite shafts where they are necessary to absorb some of the stresses where the shaft joins the club head.
The beauty of finding the components to make your own club is the fact that you can actually mix and match the components to match your game.
Some of the tools needed are:
Grip tape – two sided tape is needed
Grip tape solvent – very cheap and you can recycle the excess
Epoxy – you will needs an epoxy with a drying time of 2-3 hours
Pipe cutter for cutting steel shafts, a plumbing cutter will work fine
For graphite shaft use a hack saw
Grip cutting knife – one with a hooked blade works nicely
Sandpaper for roughing up shaft tips to epoxy them
Shaft clamp – a thick piece of rubber in a vise works well
Making a golf club consists of measuring and cutting the shaft to length, abrading the tip to make sure the bond to the head is as good as possible. You then push the ferrule over the thin end of the shaft and glue the head to the shaft with epoxy. Waiting for the epoxy to dry is the worst part of the job… You want to take your new golf club to the course and try it out. Once the epoxy has set, you wrap the butt end of the shaft with grip tape (double-sided sticky tape), wet it using one of a wide range of solvents, slide the grip over it and let dry. Once that is done, you can now clean your new golf club - polish the ferrule and end up with something better than you buy at the store.
So get to your computer, surf the net and find great websites to get your components. In no time, you will be able to create your own golf clubs. So, go and have some fun.
Those who have played golf knows that it’s addicting. Building your own club can be addicting as well.
